Skip to content
gnsscalc

Stream inspector

Inspect, grade, position and record a live GNSS stream — NTRIP, raw TCP or a USB receiver — in your browser. Several stations side by side: the network grid.

Frequently Asked Questions

What is the stream inspector for?
It connects to a live GNSS stream and shows you every message flowing through it — type, rate, size and decoded content — so you can debug a caster, a base station or a receiver. Think of it as a visual str2str with a built-in RTCM dissector.
What can I connect to?
An NTRIP mountpoint, a raw TCP host:port (both via a read-only relay), or a USB receiver directly over WebSerial (Chrome/Edge). The wire format is auto-detected — RTCM3, u-blox UBX, Septentrio SBF, NovAtel, Trimble, BINEX or NMEA — and everything is decoded in your browser.
What does it decode?
Every RTCM3 message is identified, counted and rate/bandwidth-tracked; MSM1–7 observations (all constellations), ephemerides and station/antenna descriptors are decoded field-by-field, and the receiver binaries (UBX, SBF, NovAtel, Trimble, BINEX) get the same field-by-field dissector as the file converter. The summary shows the message mix, per-type rates, bandwidth, and — for RTCM3 — the satellites, C/N0 and station position being broadcast.
Does anything leave my machine?
Only the connection to the caster you choose, relayed through the CORS proxy so the browser can reach it. The stream is decoded and inspected entirely client-side; nothing is stored.
Can I record several streams at once?
Yes. Once a stream is connected, “+ Stream” connects another — up to four — each in its own tab, and they all keep running while you switch between them or use the other tools. Every stream records from the moment it connects; “RINEX of all streams” downloads each one’s observation and navigation files in a single zip, or keeps them all in Files.