SWEREF 99 Converter (SWEREF 99 TM, RH 2000)
SWEREF 99 is Sweden’s national reference frame, its realisation of ETRS89, fixed at epoch 1999.5. Its national grid is SWEREF 99 TM (EPSG:3006), a transverse Mercator on GRS80 with central meridian 15°E, scale 0.9996 and false easting 500 000 m; municipalities use one of twelve local zones, SWEREF 99 12 00 to 23 15 (EPSG:3007–3018). Heights are given in RH 2000.
The converter opens with the Point in SWEREF 99, so you can type a northing and easting in SWEREF 99 TM or a local zone, or an RH 2000 height, and see the latitude, longitude and ellipsoidal height. The projections use Krüger’s series as Lantmäteriet publishes them; RH 2000 is the ellipsoidal height minus Lantmäteriet’s SWEN17_RH2000 geoid, at full resolution, matching PROJ to 0.2 mm.
The reference frame transform below goes to ITRF2020 / WGS84 with NKG2020, as PROJ and EPSG define it: ITRF to ETRF2014 at the coordinate epoch, the Nordic Geodetic Commission’s NKG_RF17vel land-uplift model back to 2000.0, a 7-parameter Helmert to SWEREF 99, and the model again to 1999.5. The chain matches PROJ 9.8 to 0.1 mm.
Reference frame transform
SWEREF 99 (Sweden)
Coordinate epoch2026-11-16
2026.874The Point is in SWEREF 99, which is fixed at 1999.5: the epoch here is the one you want the coordinates for. The NKG land-uplift model moves the point to it.
Loading the NKG land-uplift model…
Time-dependent 14-parameter Helmert (IERS/EPSG): the same point expressed in both frames at that epoch. WGS84 is treated as ITRF2020. Nordic frames: the NKG2020 transformation (ITRF → ETRF2014 → NKG_ETRF14 → national frame) with the NKG_RF17vel land-uplift model (Nordic Geodetic Commission, CC-BY 4.0) and, for Norway, Kartverket’s shift grid, as in PROJ; matches it to 0.3 mm. Heights stay ellipsoidal. How frames work
Plate motion
Loading plates…
The velocity GNSS coordinates drift with. ITRF2020 is a no-net-rotation frame (plates move against the average of all of them) plus the model’s origin rate bias, which is included here as Altamimi et al. recommend — calculators that leave it out (EarthScope’s “NNR”) differ by up to ~1 mm/yr.
Rigid-plate, horizontal motion from ITRF2020-PMM (Altamimi et al. 2023), plates found on PB2002 boundaries (Bird 2003). In the model’s frame its origin rate bias is included (ITRF2020, ITRF2008); against a fixed plate it cancels. No deformation, earthquakes or vertical motion. Position taken as ITRF2020/WGS84. Checked against the EarthScope plate motion calculator. How frames work
Land uplift
Loading the NKG2016LU land uplift model…
NKG2016LU, the Nordic Geodetic Commission’s land uplift model (Vestøl et al. 2019, J Geod 93), from Lantmäteriet, CC-BY 4.0. Fitted to repeated levelling and permanent GNSS stations in the Nordic and Baltic countries, and shown only there (its EPSG area of use). Interpolated on the 5′ × 10′ grid; matches PROJ to 0.01 mm/yr. How frames work
How to use it
From SWEREF 99 TM: type the northing (N) and easting (E) in the Point card’s Sweden section, or the RH 2000 height. The latitude, longitude and ECEF on the card are SWEREF 99.
From GNSS: a receiver or a PPP result gives ITRF2020 / WGS84 at the date of the observations. Set the Point’s frame to ITRF2020 / WGS84 and its coordinate epoch to that date: the transform then targets SWEREF 99 and shows the grid and height with the result, and Use as point carries it over. The land uplift card further down gives the NKG2016LU uplift rate at the point.
Other national frames
- US State Plane (NAD83)
- Lambert-93 (France)
- British National Grid
- RD and NAP (Netherlands)
- All formats and frames — ECEF, geodetic, UTM, MGRS and the other national grids
Related tools
- Positioning — PPP, RTK and DGNSS from your files, with a survey report
- Stations — Find a GNSS reference station: equipment, data, quality
- Time converter — GPS, Galileo, BeiDou, UTC, Julian dates; paste any epoch
SWEREF 99 FAQ
- How do I get SWEREF 99 TM coordinates from GNSS?
- Set the Point’s frame to ITRF2020 / WGS84 and its coordinate epoch to the date of the observations, then enter the position. In Sweden the frame transform targets SWEREF 99 by default and shows SWEREF 99 TM, the local zone and the RH 2000 height with the result. The transformation is NKG2020 with the Nordic land-uplift model, as in PROJ; in Sweden SWEREF 99 and ITRF2020 are up to about 1 m apart in 2026.
- Why does SWEREF 99 need a land-uplift model?
- Fennoscandia is still rising after the last ice age, by up to about 1 cm a year around the Gulf of Bothnia, and the crust deforms as it does. SWEREF 99 is fixed at epoch 1999.5, so a GNSS position from today has to be taken back through that deformation, not just rotated by a Helmert: the NKG_RF17vel velocity model does that. Plain ETRS89 would be centimetres off.
- Which local zone should I use?
- The converter picks the zone whose central meridian is nearest the point. Municipalities choose their own zone (SWEREF 99 12 00 to 23 15, EPSG:3007–3018), so pick yours from the list if it differs.
- Is RT 90 supported?
- No. The older RT 90 grid and RH 70 heights are not included; only SWEREF 99 with SWEREF 99 TM, the local zones and RH 2000.